Design
Title: Design
Category: /Science & Technology
Details: Words: 236 | Pages: 1 (approximately 235 words/page)
Design
Category: /Science & Technology
Details: Words: 236 | Pages: 1 (approximately 235 words/page)
DESIGN PHILOSOPHY
The purpose of this project was to gain some experience
with Pspice and to design Uncontrolled Single Phase Full Wave Rectifier
with the following two options of output voltage filtering:
Option A: With a capacitor.
Option B: With an inductor.
Uncontrolled Single Phase Rectifier converts AC voltage to DC Voltage.
The objective of the design was to achieve ripples within 5% of the rated
output voltage, high power factor and low current harmonic distortion.
showed first 75 words of 236 total
You are viewing only a small portion of the paper.
Please login or register to access the full copy.
Please login or register to access the full copy.
showed last 75 words of 236 total
by using the attached equations. These values were
dependent on the specified power output (P ). Then the power factor (PF)
and current harmonic distortion (CHD) were calculated for both designs.
Based on the values of power factor (PF) and current harmonic distortion
(CHD), it was decided which design option gave the most desirable results.
After implementation of design, it was verified by Pspice simulation,
which allowed to check if the implemented design met the specifications.